Accessories for Handles
Accessories for handles
- Microswitch with cable and plug for hot swapping
- Keying/coding pegs in accordance with IEC 60297-3-103
- Label strips
- ESD Clip for alignment pin in accordance with IEEE
Microswitch with cable and plug for hot swapping
- For hot swapping
- Max.switched current >=5mA
- Operating temperature -25～70℃
- Mechanical life >=50000 switching cycles
- Electrical life >=20000 switching cycles
- Molex connector housing 51021-0300
- Molex crimp contact 50058-8000
- Microswitch fixing clips are only used in the handle Type IVs and IV
- Material: PC+20%GF
- Microswitch Black RAL9011, fixing clip Grey RAL7032
Keying/coding pegs in accordance with IEC 60297-3-103
- For CompactPCI/VME64x applications to IEEE 1011.10 and IEC 60297-3-103
- The keying/coding pegs prevent plug-in units to be mounted in wrong slots. They are inserted in the chambers of the codable card guides as well as in the insertion/extraction handles IEL or IET (4 possible positions), resulting in 64 codings per card guide; when coding the upper and lower card guide, 4096 codings will result
- Material: PC,UL 94 V-0, Grey RAL7035, Red RAL3020
Label strips for Handles
- Encoding and naming for the front panel
- Installed on the handle of the extractor
- Material: PVC
- Surface frosted or smooth surface
- Customers can customize coding and colors
ESD Clip for alignment pin in accordance with IEEE
- ESD Clip for alignment pin in accordance with IEEE
- Spring steel, tin-plated
- Can be plugged into the guide rails with coding and into the keying/coding block
- Provides conductive contact between the alignment pin of the insertion/extractor handle (IEL or IET handle) and the horizontal rail